We can provide: TREX software ARCO,Scripts , Original english manuls !

Fuction Features:
TREX Western Digital hard disk factory software ( Western Digital hard drive repair software) , powerful software , support Desk drive and notebook hard drives (L plate series , notebook series , ROYL series) , you can backup any folder to write the firmware back to any folder or the firmware , to provide more convenient service .

Commands are: read and write firmware , read and write tracks , read and write ROM, clear GP , the combined GP table , clear SMART, clear LOG log backup on the 11th ATA module , LDR automatically load 11 , the firmware area is cleared , formatting firmware area , edit ID, internal low grid , automatic with 47 adapter module , with 40 adapter module automatically adjust the 40 modules, with the ROM, head off to test the current quality of all heads , cut Dan , since the school opened , and so on , support triangle ROYL series of hard drives , in AAJS, AAJB, AACS hard disk backup module is fast :

Test firmware
Shows the hard disk firmware directory
Check SMART Table
Clear SMART Table
Single backup module
Write a good backup a single module
Combined GP
Immediately merge pg
Clear G
Clear P
Close head
Low format
Edit ID
Write 01 sectors
Format firmware area
Firmware area cleared
Clear E0-E6 F0-F1 in the LOG
Automatic test all current head good or bad, good returns OK, bad return BAD.
Automatically get PE bin reading E8 E9 E10
Calibration pointer
Automatic self-calibration opened from 0x01 (range S53. S58) dealt with, the calibration is open.
View real-time process.
Automatically from 0x0e to open self-calibration (if sf fails, then use this to run (in the range S53. S58)) dealt with, the calibration is open.
Forced to stop calibration (set in the IDE 1, not IDE0)
Automatic backup the whole firmware track (range S53. S58)
Automatically write the whole firmware track (range S53. S58)
Automatic full for SABRE58 Series Firmware (range S53. S58)
Automatic full for SABRE53 Series Firmware (range S53. S58)
Automatic full write S58 series firmware (range S53. S58)
Automatic full write S53 series firmware (range S53. S58)
Automatic full backup S58 series firmware (range S53. S58)
Automatic full backup S53 series firmware (range S53. S58)
Write dir
Write 35 modules
Automatic with 47 adapter module (range S53. S58)
Automatic with 40 adapter module (range S53. S58)
Save 128K ROM
Write a 128K ROM
Repair patches and the bad sectors of command
Clear
Decryption
Encryption
Disable Password
Homing


Data read
L PCB measured head
exchange "L" PCB ROM
Since the adapter plate 47 L
Selected head adapter plate cut L
L track heads to save the selected board
Write head track selected
Deposit all firmware RPM
Write the whole firmware RPM
Save the whole firmware HAWK
Write the whole firmware HAWK
Save HAWK track
Write HAWK track
Initialize three
40 copies from the adapter into the 47 MR
41 copies from the adapter into the 47 MR
raider series from the copy of MR 40 adapter into the 47
raider series fit into the MR from 41 copies of 47
Save the whole firmware SEQ
SEQ write the whole firmware
Save the whole firmware BUC
BUC to write the whole firmware
RAIDER to save all firmware
RAIDER write the whole firmware
Adjustment module 40
Format covering
Save the whole firmware ORION
ORION write the whole firmware
ORION with 47

ROYL Series

32-bit pointer calibration
Automatic calibration to open ROYL series (from 01 began to run, ie a DC) dealt with, the calibration is open. Calibration
View real-time process.
Calibration of force to stop ROY
ROY test head
ROY with ROM
ROY with ROM
ATA backup module 11
Automatically load 11
Set pointer to start the calibration
Information for Adaptation
Get fit information (new)
Map display head

AAJS copy MR disc from 47 to 40
AAJS copy MR disc from 40 to 47
(Micro-code, call me.) Adapter 40
(Micro-code, call me.) Adapter 47
Adaptive ZEUS Series 47
47 R line adaptive
Beheaded and set 47
Cutting heads fit the selected ZEUS
To cut off the head of the mapping
Set the desired number of heads of TPI and CAP
ROY read and save backup ROM SA
m with ROM
Save the whole firmware RPM, and save ROM.BIN, 11 PERMOVL. BIN, 35 RPLIST.BIN
Save the whole firmware
Deposit 334,041
Save 192K ROM
Save 256K ROM
Save A 47
Save selected track head
Save a single module
Write 334 041
Write A 47
Write a 192K ROM
Write a 256K ROM
Full write firmware RPM
Since the time to write the whole firmware from RPM
Full write firmware RPM
Written to the selected track heads
Written to the selected track heads
Write a single module
Set custom CAP HQ
CAP set custom TAG
Display CAP
Show TPI
Shows the process
Editing disk model
Test head
Test the selected head
Set custom LBA
Set custom DCM
TPI head set for all
Head set for all CAP
TPI for the 0 setting
TPI is a set

TPI for the two settings
TPI for the three settings
TPI for the 4 set
TPI for the five settings
Set for the 6 TPI
TPI for the 7 set
Set the CAP to 0
CAP is a set
Set for the two CAP
Set for the three CAP
CAP for the four set
CAP set for the five
Set for the six CAP
CAP set for the 7
Read and re-fit 47 103
Reconstruction DIR
Check the calibration LOG
Compare 47 and 103
Clear the selected module
Clear the selected ID module
Clear SPTLOG
Clear all defects table
Cut the selected head adapter
Beheaded
Table shows P
Shown in Table G
Change the 28 to go C4
Format firmware area
Empty defects
Show ZONE
Dan cut the selected LBA
Show ZONE
Dan cut the selected
Exchange ROM
Engage 0B module
Exchange 40